Is your Epson M series printer suddenly displaying a “Service Required” message that is slowing down work? Don’t worry – this is an internal system issue that can be solved with the right solutions. The error message appears due to the Waste Ink Pad Counter, which has reached the maximum limit, a protection mechanism designed by Epson to prevent residual ink spills inside the machine.
If not addressed immediately, this condition not only stops the operation of the printer completely, but also has the potential to cause various secondary problems:
- Print results become suboptimal with broken lines or imperfect colors
- Ink can overflow and damage the printer’s internal electronic components
- Inflated service costs if you have to replace damaged parts
Adjustment-Program Epson comes as an official maintenance solution specifically designed to comprehensively address this problem. The software not only works to reset the Waste Ink Pad Counter, but also performs various professional maintenance tasks such as:
- Printhead calibration for precise print accuracy
- Printer System Recovery from various code errors
- EEPROM Reset to restore the default factory setting
Inversely proportional to risky manual methods, the Adjustment-Program offers professional advantages:
- Fast and accurate processes with a structured interface
- Data and system security guaranteed with official algorithms
- Can be done at any time without reliance on a service center
The software was specifically developed to handle the technical characteristics of the M-series printers, with guaranteed compatibility for all variants: M1140, M1170, M1180, M2140, M2170, M3140, M3170, and M3180.
The credibility of the program has been proven through field tests by experienced technicians with a 100% success rate on all supported series. The reset process carried out with the right procedures provides consistent and permanent results.
How to Download and Locate Epson M1140–M3180 Program Adjustment Files
To ensure that the printer reset process runs smoothly and safely, you need to download the Epson M1140–M3180 Adjustment-Program from a trusted source. This file is provided specifically for users and technicians who need an authorized tool to perform a Waste Ink Pad Counter reset, as well as maintenance of the Epson M series printer system.
Here’s a step-by-step guide to download the file correctly:
1. Make sure the internet connection is stable.
Before starting the download process, make sure that your internet connection is stable. This is important to prevent the possibility of corrupted filesdue to interruptions during the download process.
2. Disable the antivirus temporarily.
Some antivirus programs can sometimes mistakenly recognize installer files as threats. To avoid this, we recommend disabling the antivirus temporarily during the download and extraction process.
3. Click on the official download link below.
Use verified download links to ensure you get the original and secure files from third-party modifications.
4. Wait for the download process to complete.
After clicking on the link, wait for the download process to reach 100%. Downloaded files are usually automatically saved in the Downloads folder or a location you’ve pre-determined.
5. Extract RAR files using WinRAR or 7-Zip.
Once the download is complete, right-click on the RAR file and select the “Extract Here” or “Extract to Folder” option. Make sure you’re using the latest version of WinRAR or 7-Zip for the extraction process to run without errors.
6. Enter the file password when prompted.
As the extraction process progresses, the system will ask for a password. Use the following password to open the file:
Password: bami
Complete Steps Using the Epson M1140–M3180 Program Adjustment
Once the Epson M1140–M3180 Adjustment-Program file has been successfully downloaded and extracted, you can immediately perform the Waste Ink Pad Counter reset process to restore the printer’s function to its original function. Follow each step carefully to get optimal and safe results for your device.
1. Preparation Before Reset
Before running the reset process, make sure all components and connections are in a ready condition. This preparation stage is important so that the system can read the device correctly without interference with communication errors.
The preparation steps are as follows:
- Make sure the printer is in “Ready” condition and connected using an original Epson USB cable. Avoid using a third-party USB cable as it may cause an unstable connection.
- Make sure the Epson printer driver is installed correctly on your computer. You can check the status of the driver through the Control Panel → Devices and Printers.
- Close all other applications (especially antivirus or printer monitoring software) before running the reset program to avoid system conflicts.
With proper preparation, the reset process will run faster, and there is less risk of failure.
2. Run the Reset Program
Once everything is ready, run the Adjustment-Program Epson app to perform the reset. Here are the detailed steps:
- Right-click on the AdjProg.exe → file and select Run as Administrator to make sure the program has full permissions.
- On the main display, select the printer model that suits your device, such as the Epson M1140, M2140, M3170, or M3180.
- Click the Particular Adjustment Mode menu.
- Select the Waste Ink Pad Counter option, and then press OK.
- Check the Main Pad Counter, then click the Check button to display the current status of the ink pad.
- Once the counter value appears, press Initialize to reset the count to zero.
- Wait for the process to complete, then turn off the printer and turn it back on to apply the changes.
If the above steps are executed correctly, the “Service Required” message will disappear and the printer will return to normal function.